Table of Contents
Advertisement
,
Tide
Operator's Manual
the marker changes to a
+
sign. The marker will remain <It the manually
positioned mark until you either press one of the manual marker con-
trol softkeys, or until you press the Marker to Now softkey - which
returns the marker to automatic mode (indicated by the clock marker).
The tide measurement units can be displayed in meters, feet, or fath-
oms. Tide units are controlled along with depth units in the CFGI
Depth screen.
1.9M
1.1M·
-o.2M .
O.7M
1.9M
To select another port's tide table, press the E function key, and use
the Change softkey to scroll down the list or the Go Back softkey to
scroll up the list. You can also use the left and right cursor keys to
scroll through the tide tables available in TIDE2.
While in the edit mode, you can also move the cursor down to the date
and manually change it to any date you are interested in.
Once you have found the table you need, press the Ekey again to load
the table.
TlDE2 - Tide Table Port List
TIDE2 is where you store the constants for the port tide tables you are
interested in. You can store up to 100 tide tables. The constants you
need can be derived from Part III of:
Admiralty Tide Tables and Tidal Stream Tables
Published by the Hydrographer of the Navy,
United Kingdom
Hydrographic Office
Tauton, Somerset TA I 2DN
United Kingdom
+44-1823-337-900
+44-1823-323-753 Fax
46274 Telex
Version 7.5
83
Advertisement
Table of Contents
