Table of Contents
Advertisement
I
Waypoint
f©wpi"i
sorted by nuaber-
WPT:
1
WRECK.
WPT:
s T M30
6. Press the Lock all WPT softkey.
7. Press the Ekey.
Operator's Manual
To Unlock all Waypoints
I. Select the WPT key until the. WPTl screen is displayed.
2. Move the cursor to the desired waypoint.
3. Press the Ekey.
4. Press the More softkey.
5. Press the More softkey again.
sorted
by
nuMber
sorted by nul'lber
IoIPT:
1 H 52"59..llS32
IoIPT:
1 H 52"59..llS32
E 4"56.8300
E 4"56.8300
WPT:
100
IoIPT:
100 H 52"59.2170
T M30
T M30
E 4"56.9260
Make
newIoIPT
101 H
WPT:
101 H 52"S8.8940
6. Press the Unlock all WPTsoftkey.
7. Press the Ekey.
Removing Waypoints
Unlocked waypoints can be overwritten by waypoints receivcd on
the
NMEA port containing the same waypoint number, by the Mark func-
tion, or the MOB function. The Mark and MOB functions start storing
waypoints beginning at waypoint 1999 and work their way backwards.
When the Waypoint Bank is full, this process starts again at 1999 and
begins overwriting each unlocked waypoint in sequence, beginning at
1999. Waypoints that are contained within a stored route can not be
removed until they are removed from the stored route in the RTE2
Version 7.5
55
Advertisement
Table of Contents
