Table of Contents
Advertisement
Operator's Manual
Automatic Identifaction System
AIS GPS Ant A, B, C, D:
Specify the position offset of the GPS antenna used in the MX423 AIS
transponder (administrator password required).
Height Over Keel: Enter 4 digit height (i.e.
999.9)
in meters.
Softkey Descriptions:
Used to enter the administrator password to change critical AIS transpon-
der setups that require the administrator password.
rse;;dl
~
Push to send the keel depth to the transponder,
I
changel
Used to toggle through various selections available in the field.
Antenna
Location
Antenna Offset
How
to change transponder settings under the AIS Static configuration
using the administrator password?
I.
Press the CFG key.
2. Highlight the AIS Static menu.
3. Press the E key to start editing.
4. Using the cursor key move the cursor to "Password Level: User" and press
the
I
Change
I
softkey to toggle to Administrator,
5. Move the cursor down to MMSI, Ship or Call Sign field.
6 P
h
SetRIS
ftk
. ress t e
assWor
so t ey.
7. Enter the administrator password indicated on the password card (i.e. alvin)
To enter the password "alvin" do the following:
a. Press and hold down the
#1
key for 3 seconds. This
will
switch to the
lowercase letter "a".
b. The cursor will advance to the next character.
L.
i'rcss #4 key
J
times
to
bring-up the letter "1".
146
Version 1.5
Advertisement
Table of Contents
