Table of Contents
Advertisement
Operator's Manual
Automatic Identifaction System
XMIT
~lSG
- Each time this soft key is pressed, the transponder channel selection is
L...:=--'
changed. The following values are available:
AUTO SELECT - transponder determines on which channel to
broadcast the information
CHANNEL A - broadcast on channel A only
CHANNEL B - broadcast on channel B only
BOTH A & B - broadcast on both channels
- This softkey toggles the output mode between ADDRESSED or BROAD-
'--c-----'
CAST. When addressed is selected, the MMSI number will be displayed
automatically when the TOT number is specified.
1-
Pressing this softkey sends the text message to the transponder for broad-
casting.
I
MORE
1-
Show more softkeys
- Pressing this key sends the number ofpeople (specified in the AIS Voyage
'--'--"~:...!
setup) to the transponder.
I
~r~O
-
Pressing this softkey commands the transponder to send the Height Over
Keel as set in the AIS Static configuration screen.
1
BRCK
1-
Shows the previous softkeys
Note: Don't forget to press the E key to exit the editing mode.
756
Version 7.5
Advertisement
Table of Contents
