Table of Contents
Advertisement
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.
POWER SUPPLY:
Connect the supplied adaptor to the side of the unit in the slot marked "DC 5V IN". Plug
the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty
inserting the plug, turn it over and reinsert it. If the unit is not used for a long time,
disconnect the plug from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections
have been made.
Important Safety
Instructions
1
Advertisement
Table of Contents
Related Manuals for Leica Mojo Mini
Summary of Contents for Leica Mojo Mini
- Page 1 Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
-
Page 2: Important Safety Instructions
Important Safety Instructions CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. - Page 3 Important Safety Instructions 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Page 4 Important Safety Instructions UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY GPS RELATED FUNCTIONS OF THIS PRODUCT. Notice for the USA FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 5 Important Safety Instructions MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. The images in this manual are for reference only and they may appear different from the actual items.
-
Page 6: Accessories
Accessories List The following items are included with your GPS unit. ITEM NAME Car Adaptor Mounting Bracket Mounting Cradle Stylus USB Cable User’s Manual NOTE Accessories and their parts numbers are subject to modification without prior notice due to improvements. -
Page 7: Table Of Contents
Contents …………………………………..……..…..1 Important Safety Instructions ……………………………….……….…..5 Accessories ……………………………….………..…...7 View of Main Unit ………………………………..…………..9 System Connections ……………………………….…….….…10 Power supply Preparation …………………………….…….….…….11 Use of the Mount Accessories ……………………………….……….…..12 Troubleshooting …………………………….……………...14 Specifications... -
Page 8: View Of Main Unit
View of Main Unit LCD Screen Finger touches the screen directly or use the stylus included for optional. Charge Indicator When charging the battery, it is red. W hen the battery is fully charged, it turns green. POWER Button Press for a longer time to enter or exit the standby mode. ON/OFF Switch Used to switch power on or off. - Page 9 View of Main Unit Speaker NOTE: In order to acquire good GPS signals, make sure the area with built in GPS Antenna of the unit is not obstructed by something(such as heat insulation paper) and has a clear view of the sky. And you’d better to position the unit with its GPS antenna area slightly upward inclinded.
-
Page 10: System Connections
System Connections Always ensure that the unit and any other external device connected to the unit are switched off and unplugged from the power supply before you attempt to connect the unit to any external device. Inserting SD Card The unit is designed with SD Card slot which allows you to insert the SD card into the unit as shown below: To remove the card, gently press the card in with your fingernail. -
Page 11: Power Supply Preparation
Power Supply Preparation Using the Car Adaptor The unit is supplied with a Car Adaptor for powering while in a vehicle. Connect the Car Adaptor Power Plug to the unit’s USB charging port and plug the other end to the vehicle’s 12-24V accessory cigarette socket, as shown below. Attention: ... -
Page 12: Use Of The Mount Accessories
Use of the Mounting Accessories When using the unit in vehicle, you can use the supplied mount accessories (mount bracket and mount cradle) to mount the unit in the vehicle. Take the following steps to operate: See Fig. 1, slide the mount cradle onto the end of the mount bracket to fix it. See Fig. -
Page 13: Troubleshooting
Troubleshooting Take steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because it is dangerous to do so. - Page 14 Troubleshooting PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The unit can The built-in rechargeable Use the adaptor to supply receive signals battery is weak. power or charge the now but can’t then battery. or signals received are not stable. The unit may be Remove the veil.
-
Page 15: Specifications
Specifications TFT screen size 4.3 inches Frequency Response 20Hz - 20kHz ≥65dB Audio Signal-to-noise Rate ≤-20dB (1kHz) Audio distortion+noise ≥70dB (1kHz) Channel Separation ≥80dB (1kHz) Dynamic Range Power DC 5V Power Consumption < 8W Dimensions 118mmX78mmX16mm (L*W*D) Weight About 0.16Kg Design and specifications are subject to change without notice.