Goto - Leica MX420 Operator's Manual

GOTO Operator's Manual
S
GOTO
Using the GOTO function key is the fastest way to create a single leg
route. This method will cause the existing active route to be erased and
overwritten with the new position you define.
I. From any screen press the GOTO key.
2. Press the Ekey.
3. Select the waypoint determination method you want:
Waypoint Number - allows you to choose a waypoint stored in the
Waypoint Bank, where you enter the waypoint number.
Choose in Bank - as used in the Route function (refer to Route -
Choose In Bank section of the manual), allows you to view
waypoints in the Waypoint Bank as a list.
Lat. Lon., Grid Point, Loran C TD's, Deeca TD's - allows you to
define a coordinate and description, which is also stored at the
next available waypointlocation in the Waypoint Bank.
Bearing Range - allows you to define a coordinate by specifying
the bearing and range from your present position, which is also
stored at the next available waypointlocation in the Waypoint
Bank.
If you make a mistake. you can use the cursor key to position the
cursor over the mistake and ovcrwritc the error.
Use the DGPS key or cursor key to insert a space in the descrip-
tion, if needed.
Use the CFG key
to
select a special character, ifneeded.
Version 1.5
67