Configuring The Ais Voyage - Leica MX420 Operator's Manual

Automatic Identification System Operator's Manual
d. Press the #8 key one time for letter "v".
e. Press the #3 key 3 times for letter "i".
f.
Press the #5 key 2 times for letter "n".
g. Press the Done softkey.
8. Move the cursor to the MMSI number and enter the desired value.
9. Move the highlight to "Ship:" and spell out the name of the vessel (up to 20
alphanumeric characters).
10. Move the highlight to "Call Sign:" and enter up to 7 characters.
11. To change other setup items use the cursor key to scroll down or up and
enter the number or name required or press the
I
Changelsoftkey when
available.
12. At the end of editing, press the Ekey to exit.
Configuring the AIS Voyage
Information about the ship's destination, ETA time and date, number of
passengers/crew and type of vessel are entered in the MX420 for each voyage
or whenever needed.
:©i:Firi
Ite,,:
RIS Static
1·,L ....
J.('g.&i
AlarMS
Rnc.hor
COG SOG
CoMpass
DatU1'l
Depth
Send
People
!=lIS Voyage
~IS UOl.laqe Configuration:
Nav Slat.: lltiS••
mii.i4·1
Destination:
. ©©©©©©©©©©©©©
ETRTu..: 00:00
I
ETR Date: ..........• Jan 6. 1980 '
Draught: 0.0"
Ho of People: 0
Ship/Cargo Type: "Sl
Pleas.... Craft
AIS Voyage Parameter Descriptions:
Nav Stat - Press thel Cha1lge\softkey to select specific status. This setup item
controls the AIS status icon shown on the upper-right corner of
the display. See section below for all available nav-stat icons
and descriptions.
Destination - Enter the 20 character destination name. A string of' • • • •
indicates the destination has not been set.
ETA Tune - Enter the estimated time of arrival at the desired destination.
ETA
Date -
Enter the estimated date of arrival at the desired destination.
Draught - Enter draught height in meters.
No. of People - Enter the number of people on board (1-819 I).
Ship/Cargo Type - Use the
I
Change
Isoftkey to toggle ship cargo choices.
Refer to table A.2 for possible ship type values (0-255).
Version 7.5
747