Leica MX420 Operator's Manual page 159

Operator's Manual
Automatic Identifaction System
Softkey Descriptions:
I
chang·l- used to toggle through various values available in the field.
I
p;:;1.1-
press this softkey to send the information about the number of people
on-board to the transponder for broadcasting.
Nav Stat Icons and Descriptions:
[I]
Vessel underway
[j]
Not Defined
[I]
Vessel not commanded, limited maneuverability, limited by draught, aground
or reserved for future use.
l-tl
Ship is anchored or moored
[IJ
MX420 not communicating with transponder
Note: The displayed icons located on the top-right corner ofthe screen
is
set to
blink offevelY 3 seconds to allow the operator to see what
is
behind it and
is
not considered an alarm condition. An every second blinking
is
an
alarm condition.
148
Version 1.5