Table of Contents
Advertisement
Operator's Manual
Waypaim
screen. Ifyou try to remove a waypoint stored in a route, a warning will
be displayed indicating the first route a waypoint is stored in.
If the waypoint you want remove is locked, refer to the Waypoint
Lock/Unlock section for a step by step procedure, and then return to
this section.
To remove a waypoint:
I. Select the WPT key until the WPTl screen is displayed.
2. Move the cursor to'the desired waypoint.
3. Press the Ekey.
4. Press the Remove softkey.
:©WPT 1
sorted
by nUMber
WPT:
100 H 52"59.2170
T
1'130
E
4"56.9260
WPT:
101
T 1012
orted by nUPlber
WPT:
100
H
52"59.2170
T M30
E
4"56.9260
WPT:
101 H 52"58.8940
T W2
E
4"56.9070
Escape
56
There are three methods to remove a waypoint: Remove this WPT,
Remove Unused, and Remove Range:
5a. If you select Remove this WPT, the waypoint will immediately be
removed from the Waypoint bank.
5b. If you select Remove Unused, the CDU will delete all waypoints
that are not locked or stored in a route. You will be prompted to
confirm the deletion:
f:lll waypOinls which are
unlocked
and not. used in
a r-oute, will be r-enoved
!
Doyou want. t.o c.ontinue ?
5c If you select Remove Range, the CDU will delete all unlocked
waypoints that are not stored in a route between a range of
Version 1.5
Advertisement
Table of Contents
