Leica MX420 Operator's Manual page 110

Operator's Manual GPS
Once you have entered the data for several beacon stations, you can
cycle between these stations by pressing the Next Station or Previ-
ous Station softkeys. These softkeys are only displayed if you have
entered a name for the reference station.
The window on the right side of the display indicates which satellite
ID's are receiving corrections. When the PRN number is shown in
inverse video, this indicates that the receiver is using the correction in
the navigation solution. The Corr value is the actual satellite range
measurement correction, given in meters. This value is typically be-
tween -20 and +20. The Age value indicates how long it has been since
the satellite range correction was generated, given in seconds.
GPS7 - OGPS Messages
This screen will display the Type 16 messages received from the beacon
station being used. These messages may contain information regarding
operational problems and status or any scheduled equipment
maintenance of beacon stations operating within the general area.
Note: The
GPS
function is not active in the
MX420lAIS
Basic model
without the
MX421
antenna.
·©GPS?
Dl3PS M
ESSRGES··
Msg;03 10:0265 TiMe:Jul-01-2001 10:40:00
VIlNDENBERG OFF-IlIR 0317002 TO 0321002
JUL 01
MS9:02ID:0265 TiMe:Jul-02-2001 10:03:20
VIlNDENBERG OFF-IlIR 0317002 TO 0321002
JUL 01
98
VP.rsinn 1.S