Moving Waypoints - Leica MX420 Operator's Manual

Waypoint
Operator's Manual
waypoint numbers that you enter. You will be prompted to con-
firm the deletion:
sor
. Waypoint.s in the specified
f"
¥P,. r~ns'? will
be
reMoved.
Fir-st. wpl nunbere .
Last wpt.
nunberx :
WP Loc.ked wpt's and wpt's in routes
T will not be r-enoved,
6. Press the Ekey.
Moving waypoints
This feature allows you to create a range of waypoints within a par-
ticular area. For example, you could put all ofthe waypoints for fishing
spots near Catalina Island in the range of500 to 530, all the waypoints
for Cabo San Lucas in the range of575 to 600, etc.
To move a waypoint or range of waypoints:
1.
Select the WPT key until the WPTl screen is displayed.
2. Press the E key.
3. Press the More softkey,
4. Press the Move softkey.
sorted by nul'lber
WPT: 100
T M30
WPT: 101
T 1.12
5a. To move a single waypoint, enter the original waypoint number on
the First WPT Number and Last WPT Number.
5b. To move a range of waypoints, enter the first and last waypoint
numbers to move on the First WPT Number and Last WPT Number,
Version 7.5
57