Table of Contents
Advertisement
Operator'S Manual
Waypoint
'W'j:iVP'Oi"NT-S'
UITI LEUU 1916
"'RKE-E}UWETOKI960
m
"'GS-84
+
OFFSET d .
\l6S-72
e
EUROPEAN 1950 .
HAD 27 (CONUS>
HOR'TH RMERICRH 1983
t
T •
•
"'PT:
107 H 52"58.021
i(~ri;iPTT
'i;:fj:i-':;'-poIN-Ts'
s
.5
dIfferent ",ays:
• Latitude and Longitude
inPUt
in
t
current selec.ted DaWN
"'GS-84<101(4)
• He'"DatUM, Latitude
and
Longit.ude
input.
• Range and Bearing relative
to
the
selec.ted ",aypoint.
Lat/Lon (W84) - allows you to enter coordinates in the WGS 84
datum. This choice takes you directly into the coordinate input
screen. Go to step 5.
Lat/Lon Datum - allows you to choose a datum (see the list in the
screen sample above) from the more than 110 available Oatums.
Highlight the desired datum and press the Select softkey. Refer
to Appendix A
~
Datum List for a complete list of datums and
their WGS-84 offset. Go to step 5.
©WPrT
W~YPOINTS
Enler Range and Bearing relative
to
",a oint nul'Iber 105
"'PT:
105 H 52"58.3090
t
bJ3
E 4"56.9520
WPT:
I H 53"03.3090
~
E 4"56.9520
Esc.ape
WPT I
WRYPOINTS
Enter Range and Bearirl9 relalive to
wa
inl
nuI'lber
105
WPT:
105
H 52"58.3090
t
bJ3
E 4"56.9520
1 H 52"55.5858
~
E
5"03.9117
Range Bearing - allows you to define new waypoint coordinates
from an existing waypoint in the Waypoint Bank. When you
use this feature make sure you align the cursor next to the from
waypoint number before you press the Make New WPTsoftkey.
Once you have entered the range and bearing, the COU calcu-
lates the coordinates. You can then enter a text description or
modify the waypoint number as described in step 6 below. Go to
step 6.
4b.Edil This WPT - Select Accept to use the WGS 84 datum or press
Change to choose from the more than 110 available Oatums. High-
50
Version 7.5
Advertisement
Table of Contents
