Table of Contents
Advertisement
GPS
Operator's Manual
Stat.us:
Searching PRH
Corr (:l:ge .
St.ation select:
Manual
NaMe:
*********
Station Id:
Distance:
Health:
~.KHz
**.**
NI"\
***
"
..
(Point)
Use the cursor key to move down the screen again and program the
frequency you desire. The receiver will automatically update the Sta-
tion ID, If the beacon station is transmitting its location, the receiver
will calculate the distance between the reference station and the re-
ceiver, otherwise this will be blank. You can usually find current bea-
con status, location, and operating information from the governing
country's Coast Guard or Maritime Safety Administration. You will
find a list of known beacon stations inAppendix C - Beacon List at the
end of this manual. This list may be incomplete at your location, in
which case we encourage you to contact the appropriate governing
agency.
Status:
DGPS OK
Stat.ion select..:
IhQi,liMI
Nal'le:
Pt. L""a .
Station Id:
Distance:
Health:
Next
Station
Change
Version 7.5
When you are in manual tuning mode, pressing the E key will bring up
the cursor on the Frequency. You can only complete the manual tun-
ing operation by pressing the E key when the Frequency is high-
lighted.
Program the frequency you desire and press the E key. The COU will
automatically update the Station ID. If the beacon is transmitting its
location, the COU will calculate the distance between the reference
station and the receiver.
You can usually find the current beacon status, location and operating
information from the governing country's Coast Guard or Maritime
Safety Administration. You will find a list ofknown beacon stations in
Appendix C - Beacon List at the end of this manual. This list may be
incomplete, in which case we encourage you to contact the appropri-
ate governing agency.
97
Advertisement
Table of Contents
