Table of Contents
Advertisement
Operator's Manual
Configuration
Engineering Display: This enables an expanded series of display
screens in some ofthe functions. In general, these screens are
used by the technician during troubleshooting or by Leica
engineers during development testing. Screens which are rel-
evant for troubleshooting are described inAppendix D of this
manual. The default setting is No. If you should enable these
screens, the receiver will automatically turn them off the next
time power is cycled on the unit.
Demonstration Mode: This enables the 'receiver to function as
though you are under way, even though you are completely
stationary. The default setting isNo. When set to Yes, all three
Traffic Lights will be illuminated, and a D symbol is displayed
in the upper right corner ofevery display. Generally speaking,
this feature is used by Leica and your dealer for show room or
trade show demonstrations. However, you can use it as a train-
ing tool until you become familiar with the receiver.As a safety
feature, you can not use it to output NMEA 0183 records on
the data ports to test and demonstrate other devices such as
autopilots, chart plotters, and radars. Refer to Appendix F of
this manual for a full description ofthe Demonstration Mode.
Organizer - Automated Message Reminders
This screen enables you to program the receiver with up to 25 different
message reminders (up to 30 characters in length). You can program it
to alarm for shift changes, log entry intervals, medication intervals,
weather fax updates, etc.
Note:
When the Organizeralarm is activated, the volt-
age on the Alarm OutputPort is also activated. If
you have other devices connected to this port,
you might need to consider what other systems
will be affected when the alarm sounds. Leica
offers an External Alarm control software op-
tion. Check with your dealer
or
Leics.
or refer
to
the Options Manual for details on this software
package.
122
Version 1.5
Advertisement
Table of Contents
