Table of Contents
Advertisement
Route
Operator's Manual
Rctive Route:
15 WPTs
12 WPTs /
5.43 HM
7
J
2001 21:29
Use the up
(~)
softkey to unpass or the down
(~)
softkey to pass
waypoints in the route until the waypoint marked by the cursor is
displayed with white characters on a black background (Daylight dis-
play, see CFGl Lighting).
Press the Ekey to end editing.
Iffor some reason you can't select the waypoint you want (the screen
keeps passing waypoints you unpassed), you are probably too close
to one ofthe waypoints. You will need to either change your Waypoint
Pass Criteria, change your Waypoint Pass Distance (see CFGl Navi-
gation), or remove the waypoint from the route.
Inserting Waypoints or Routes into an Existing Route
I. Select the RTEkey until the
RTEI screen is displayed.
2. Scroll through the route with the cursor key until the cursor arrow
is at the bottom of the waypoint you want to insert the new
waypoint after.
._._-----_
_----------
Rctive Route:
4 LlPTs
ReMaining:
2 WPTs /21.84
HM
EH!:
28 Del, 199600:34
_._._----_.._._._..
-0_._.._--
Ilcti"" Route:
4 LlPTs
ReMaining:
2 "'PTs / 21.81 H"
ETI!:
28 Oct. 1996 00:35
Version 7.5
3. Then press the Ekey.
4. Use one or more ofthe insert methods described in the Creating a
Multi-Waypoint Active Route section above.
This example shows Waypoint 7 inserted into the route using the
Insert by Number method:
39
Advertisement
Table of Contents
