Table of Contents
Advertisement
Operator's Manual
Route
7. When you are finished, press the
Done
softkey to get back to the
main menu.
8. You can then choose to select another waypoint using the same
method, select
Escape
to go back one level and use another method
to enter waypoints, or select
Done
do go back to the main menu.
9. Don't forget to press the E key to end your editing.
Insert New
Way
point
The following example assumes
RTEI
is empty. Follow the directions
in the
Erasing an Existing Route
section to start with an empty route
if you have waypoints in the
RTEI
screen.
\. Select the RTEkey until the
RTEI
screen is displayed.
2. Press the Ekey to enter the edit mode.
3. Select
Insert
from the display. Skip to the next step ifRTEI is empty.
4. Select
Insert new Waypoint
from the display.
.....................................-.-
- - ..""DJ'"
AcUve Route:
0 IolPTs .
ReMaining:
.-- WPTs / --- .HM
I
EHI:
--:--
~-.
'.~
Active Route:
0 IolPTs
ReMaining:
-- WPTs / --- HM
~~;;,,;,,~ETA:
5. Choose either Bearing. Distance or l.at/Lon (Grid Point. or TO if
you are using other coordinate systems). Use the keypad to type in
the range and bearing from the previous waypoint (or present po-
sition in the case of the first waypoint) or the coordinates you want
and their appropriate description.
36
Version 7.5
Advertisement
Table of Contents
