Disassembly And Assembly - Jeep cherokee 2000 Service Manual

21 - 8 AX5 MANUAL TRANSMISSION
REMOVAL AND INSTALLATION (Continued)
Fig. 14 Install Adapter Housing Seal
1 – SPECIAL TOOL 8208
2 – ADAPTER HOUSING
3 – SPECIAL TOOL C-4171

DISASSEMBLY AND ASSEMBLY

ADAPTER/EXTENSION HOUSING AND FRONT
BEARING RETAINER
DISASSEMBLY
(1) Drain transmission lubricant, if necessary.
(2) Remove release bearing and lever.
(3) Remove clutch housing bolts and remove hous-
ing (Fig. 17).
(4) Remove vehicle speed sensor and speedometer
adapter, if necessary.
(5) Remove bolts holding shift tower to transmis-
sion case.
(6) Remove shift tower from transmission case
(Fig. 15).
(7) Remove shift tower gasket from shift tower or
transmission case (Fig. 16).
Fig. 15 Remove Shift Tower
1 – SHIFT TOWER
2 – ADAPTER/EXTENSION HOUSING
Fig. 16 Remove Shift Tower Gasket
1 – SHIFT TOWER
2 – GASKET
(8) Remove detent ball plug (Fig. 18).
(9) Remove detent spring and ball with pencil
magnet (Fig. 19), (Fig. 20).
XJ