XJ
DISASSEMBLY AND ASSEMBLY (Continued)
washer on gear. Be sure all four washer tabs are
seated in slots.
(7) Install spacer on sun gear (Fig. 205).
(8) Install thrust plate on sun gear (Fig. 206). Note
that driving shell thrust plates are interchangeable.
Use either plate on sun gear and at front/rear of
shell.
Fig. 202 Assembling Rear Annulus And Planetary
1 – REAR ANNULUS GEAR
2 – TABBED THRUST WASHER
3 – REAR PLANETARY
Fig. 203 Installing Rear Annulus And Planetary On
Output Shaft
1 – REAR ANNULUS AND PLANETARY GEAR ASSEMBLY
2 – OUTPUT SHAFT
Gear
AUTOMATIC TRANSMISSION—30RH
Fig. 204 Installing Rear Planetary Front Thrust
1 – FRONT TABBED THRUST WASHER
2 – REAR PLANETARY GEAR
Fig. 205 Installing Spacer On Sun Gear
1 – SUN GEAR
2 – SUN GEAR SPACER
21 - 187
Washer