Jeep cherokee 2000 Service Manual page 1234

21 - 326 AW–4 AUTOMATIC TRANSMISSION
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 278 Checking Sun Gear Bushings
1 – BORE GAUGE
ASSEMBLY
(1) Install first snap ring on sun gear.
(2) Install sun gear in drum and install remaining
snap ring.
(3) Coat replacement seal rings with petroleum
jelly and install them on sun gear. Be sure seal
ring ends are interlocked.
(4) Install thrust washer. Be sure washer tabs are
seated in drum slots.
1 – THRUST WASHER
2 – SNAP RING
3 – SPRING RETAINER
4 – PISTON RETURN SPRINGS
5 – REAR PLANETARY/OUTPUT SHAFT/FIRST-REVERSE
BRAKE
Fig. 279 Installing Clutch And Hub Assembly On
1 – CLUTCH AND HUB ASSEMBLY
(5) Install
assembly on sun gear. Deep side of hub flange faces
upward (Fig. 279).
Second Brake Components
6 – SECOND BRAKE DRUM
7 – O-RINGS
8 – SECOND BRAKE PISTON
9 – PISTON SLEEVE
Sun Gear
one–way clutch/second
XJ
brake hub