Jeep cherokee 2000 Service Manual page 922

21 - 14 AX5 MANUAL TRANSMISSION
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 36 Speedometer Drive Gear Assembly
1 – SNAP RING
2 – LOCK BALL
3 – SNAP RING
4 – OUTPUT SHAFT GROOVES
5 – SPEEDOMETER GEAR
Fig. 37 Install Adapter/Extension Housing–Typical
1 – ADAPTER HOUSING
2 – INTERMEDIATE PLATE
(11) Start shifter arm shaft in hole in back of
adapter or extension housing. Align shift arm and
shifter arm shaft and insert shifter arm shaft
through the shifter arm and into the forward portion
of the adapter or extension housing (Fig. 39).
Fig. 38 Position Shift Arm in Adapter or Extension
1 – SHIFT ARM
(12) Rotate the shifter arm shaft until the hole in
the shift arm is aligned with the hole in the shaft.
(13) Install the shift arm retainer bolt and tighten
to 38 N·m (28 ft. lbs.) (Fig. 40).
(14) Install and tighten shifter arm shaft plug to
18 N·m (13 ft. lbs.) torque (Fig. 41).
Fig. 39 Install Shifter Arm Shaft
1 – SHIFT ARM
2 – ADAPTER OR EXTENSION HOUSING
Housing
XJ