Jeep cherokee 2000 Service Manual page 923

XJ
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 40 Install Shift Arm Retainer Bolt
1 – RETAINER BOLT
2 – SHIFT ARM
Fig. 41 Shifter Arm Shaft Plug Installation
1 – SHAFT PLUG
(15) Install shift restrictor pins in shift tower and
tighten to 27 N·m (20 ft. lbs.) (Fig. 42).
AX5 MANUAL TRANSMISSION
NOTE: The restrictor pins are not interchangeable
and are color coded. Be sure to install the pin into
the same location from which it was removed.
Fig. 42 Install Shifter Restrictor Pins
1 – RESTRICTOR PINS
(16) Install shift detent ball in detent opening of
case (Fig. 43).
(17) Install detent spring in case (Fig. 44).
(18) Install detent plug and tighten to 19 N·m (14
ft. lbs.) (Fig. 45).
Fig. 43 Install Detent Ball
1 – PENCIL MAGNET
2 – SHIFT DETENT BALL
21 - 15