Jeep cherokee 2000 Service Manual page 1212

21 - 304 AW–4 AUTOMATIC TRANSMISSION
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 211 Checking Piston Return Spring Length
1 – PISTON RETURN SPRINGS
2 – SPRING RETAINER
Fig. 212 Testing Clutch Piston Check Ball
1 – CLUTCH PISTON CHECK BALL
2 – USE LOW-PRESSURE COMPRESSED AIR TO TEST BALL
SEATING
(14) Check inside diameter of clutch drum bush-
ings with bore gauge or inside micrometer (Fig. 213).
Maximum inside diameter is 27.11 mm (1.0673 in.).
Replace drum if bushing inside diameter is greater
than specified.
(15) Remove bearing and race from ring gear (Fig.
214).
Fig. 213 Checking Clutch Drum Bushings
1 – CLUTCH DRUM
Fig. 214 Removing Ring Gear Bearing And Race
1 – BEARING
2 – RACE
3 – RING GEAR
XJ