Jeep cherokee 2000 Service Manual page 987

XJ
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 117 Correct Seating Of Shift Shaft Lever Roll
1 – BUSHING LOCK PIN SLOT
2 – SEAT ROLL PIN FLUSH WITH LEVER
Fig. 118 Starting Roll Pin In Shift Socket
1 – ROLL PIN
2 – SHIFT SOCKET
3 – SHIFT SHAFT
(14) Seat roll pin in shift socket with pin punch.
Roll pin must be flush with socket after installation
(Fig. 119).
(15) Verify that notches in shift fork arms are
aligned. Realign arms if necessary.
FRONT HOUSING AND INPUT SHAFT BEARING RETAINER
(1) If previously removed, install input shaft bear-
ing in front housing bore (Fig. 120). Install snap ring
and use plastic mallet to seat bearing. Bearing goes
in from front side of housing only.
Pin
NV3550 MANUAL TRANSMISSION
Fig. 119 Seating Shift Socket Roll Pin
1 – PIN PUNCH
2 – SHIFT SOCKET
3 – SEAT ROLL PIN FLUSH
4 – SHIFT SOCKET
Fig. 120 Input Shaft Bearing And Countershaft Front
1 – INPUT SHAFT BEARING
2 – COUNTERSHAFT FRONT BEARING
3 – SHIFT SHAFT BUSHING
Bearing
21 - 79