The UCM61xx provides LCD interface, LED indication and web GUI configuration interface.
•
The LCD displays hardware, software and network information of the UCM61xx. Users could also
navigate in the LCD menu for device information and basic network configuration.
•
The LED indication at the front of the device provides interface connection and activity status.
•
The web GUI gives users access to all the configurations and options for UCM61xx setup.
This section provides step-by-step instructions on how to use the LCD menu, LED indicators and Web GUI
of the UCM61xx. Once the basic settings are done, users could start making calls from UCM61xx
extension registered on a SIP phone as described at the end of this section.
USE THE LCD MENU
•
Default LCD Display
By default, when the device is powered up, the LCD will show device model (e.g., UCM6116),
hardware version (e.g., V1.5A) and IP address. Press "Down" button and the system time will be
displayed as well.
•
Menu Access
Press "OK" button to start browsing menu options. Please see menu options in [
].
Options
•
Menu Navigation
Press the "Down" arrow key to browser different menu options. Press the "OK" button to select an
entry.
•
Exit
If "Back" option is available in the menu, select it to go back to the previous menu. For "Device Info"
"Network Info" and "Web Info" which do not have "Back" option, simply press the "OK" button to go
back to the previous menu. Also, the LCD will display default idle screen after staying in menu option
for 15 seconds.
•
LCD Backlight
The LCD backlight will be on upon key pressing. The backlight will go off after the LCD stays in idle for
30 seconds.
The following table shows the LCD menu options.
Firmware Version 1.0.1.22
GETTING STARTED
UCM6102/6104/6108/6116 USER MANUAL
Table 4: LCD Menu
Page 20 of 138