This section provides information about using the LCD menu, LED indicators and Web GUI of the
UCM6102/UCM6104/UCM6108/UCM6116. The last section describes how to make your first call using the
UCM6102/UCM6104/UCM6108/UCM6116 with your SIP phone.
USING THE LCD MENU
•
Default LCD Display
By default, when the device is powered on, the LCD will show device model, hardware version and IP
address.
•
Menu Access
Press "Down" or "OK" button to start browsing menu options.
•
Menu Navigation
Press the "Down" arrow key to browser different menu options. Press the "OK" button to select an
entry.
•
Exit
There is "Back" option in the menu. Select it to go back to previous menu. Also, the LCD will come
back to default display after being idle in menu for more than 20 seconds.
The following table shows the LCD menu options.
View Events
Device Info
Network Info
Network Menu
Firmware Version 1.0.0.32
GETTING STARTED
Table 4: LCD MENU OPTIONS
•
Critical Events
•
Other Events
•
Hardware: Hardware version number
•
Software: Software version number
•
P/N: Part number
•
MAC: MAC address
•
Uptime: System up time
•
Mode: DHCP, Static IP, or PPPoE
•
IP: IP address
•
Subnet Mask
•
LAN Mode: Select LAN mode as DHCP, Static IP or PPPoE
UCM6102/6104/6108/6116 USER MANUAL
Page 19 of 108