Ricoh D104 Field Service Manual page 1060

3. Appendix: SP Mode Tables
P:Jobs/PGS
8 074
These SPs count and calculate the number of print jobs by size based on the number of
pages in the job.
S:Jobs/PGS
8 075
These SPs count and calculate the number of scan jobs by size based on the number of
pages in the job.
3
L:Jobs/PGS
8 076
These SPs count and calculate the number of jobs printed from within the document server
mode window at the operation panel, by the number of pages in the job.
O:Jobs/PGS
8 077
These SPs count and calculate the number of "Other" application jobs (Web Image
Monitor, Palm 2, etc.) by size based on the number of pages in the job.
8 07x 1 1 Page
8 07x 2 2 Pages
8 07x 3 3 Pages
8 07x 4 4 Pages
8 07x 5 5 Pages
8 07x 6 6 to 10 Pages
8 07x 7 11 to 20 Pages
• For example: When a copy job stored on the document server is printed in document server mode,
the appropriate L: counter (SP8076 0xx) increments.
• Printing a fax report counts as a job and increments the F: counter (SP 8073).
• Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
• If a job is paused and re-started, it counts as one job.
• If the finisher runs out of staples during a print and staple job, then the job is counted at the time the
error occurs.
• For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the number
of sets of copies by the number of pages scanned. (One duplex page counts as 2.)
• The first test print and subsequent test prints to adjust settings are added to the number of pages of the
copy job (SP 8072).
342
*CTL [0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
8 07x 8 21 to 50 Pages
8 07x 9 51 to 100 Pages
8 07x 10 101 to 300 Pages
8 07x 11 301 to 500 Pages
8 07x 12 501 to 700 Pages
8 07x 13 701 to 1000 Pages
8 07x 14 1001 to Pages