Ricoh D104 Field Service Manual page 1006

3. Appendix: SP Mode Tables
001 Report Validity
005 Add Date Field
3
5870 [Common Key Info Writing]
001 Writing
Initialize
Initializes the set certification.
When the GW controller board is replaced with a new one for repair, you must execute the
003
"Initiralize (-003)" and "Writing (-001)" just after the new board replacement.
NOTE: Turn off and on the main power switch after the "Initiralize (-003)" and "Writing
(-001)" have been done.
5873 [SD Card Appli Move]
001 Move Exec
002 Undo Exec
5875 [SC Auto Reboot]
288
Enables or disables the e-mail alert.
*CTL [0 or 1 / 0 / – ]
0: Enable, 1: Disable
Adds or does not add the date field to the
header of the alert mail.
*CTL
[0 or 1 / 0 / – ]
0: Not added, 1: Added
Rewrites the common certification used for the
*CTL
@Remote.
*CTL -
This SP copies the application programs from the original SD card in
SD card slot 2 to an SD card in SD card slot 1.
This SP copies back the application programs from an SD card in SD
Card Slot 2 to the original SD card in SD card slot 1. Use this menu
when you have mistakenly copied some programs by using "Move
Exec" (SP5873-1).