Siemens SIMATIC IPC547E Operating Instructions Manual page 83

3. Unlock the socket and lift the socket cover.
4. Remove the processor.
Installation
1. Install the new processor on the socket, as shown in the figure.
2. If you use a processor of a different type, perform a BIOS update.
SIMATIC IPC547E
Operating Instructions, 09/2013, A5E32317120-AA
During positioning, make sure to take the highlighted arrow on the processor into
consideration.
The rest of the procedure is described in the manual for the motherboard on the supplied
"Documentation and Drivers" DVD.
The microcode matching the processor is loaded in the process.
NOTICE
Damage to the processor
If the installed processor is operated with a higher clock frequency than permitted, it can
be destroyed or cause loss of data.
Operate the processor only at a clock frequency that is equal to or less than the
permitted clock frequency.
Device maintenance and repair
7.4 Removing and installing hardware components
83