Siemens SIMATIC IPC547E Operating Instructions Manual page 105

Interfaces
COM 1
COM 2 (optional)
LPT (optional)
VGA
DisplayPort V1.2
DVI-I
2 × DVI-D/VGA with dual-head
graphics card (optional)
PS/2 keyboard
PS/2 mouse
USB 2.0
USB 3.0
Ethernet
Audio
•
•
•
1
SIMATIC IPC547E
Operating Instructions, 09/2013, A5E32317120-AA
Micro
Line In
Line Out
AMT and teaming cannot be used simultaneously on the Ethernet interface.
Serial interface 1 (V.24), 9-pin D-sub plug
Serial interface 2 (V.24), 9-pin D-sub plug
Parallel interface (Standard, EPP and ECP mode)
Connection forer with parallel port
Connection of an analog monitor, via adapter cable, optional
For connecting a digital monitor
For connecting a digital monitor
For connecting two digital or analog monitors
Keyboard connection
Mouse connection
USB 2.0 HighSpeed
Back of device: 6 × 500 mA, high current
•
Internal: 1 × 500 mA, high current with mechanical locking
•
mechanism, optional
USB 3.0 SuperSpeed, backward compatible with USB 2.0/1.1
Back of device: 2 × 500 mA, high current
•
Front of device: 2 × 500 mA, high current
•
2 × Ethernet interface (RJ45)
10/100/1000 Mbps
Ethernet 1: Intel Clarkville i217LM, AMT-capable
• ®
Ethernet 2: Intel Springville i210-AT
• ®
Wake on LAN, Remote Boot and the Teaming modes are
supported:
Adapter Fault Tolerance (AFT)
•
Adaptive Load Balancing (ALB)
•
IEEE 802.3ad Dynamic Link Aggregation (DLA)
•
Static Link Aggregation (SLA)
•
Switch Fault Tolerance (SFT)
•
Realtek ALC671, 6-channel DAC support
2 W at 4 Ω
Technical specifications
8.4 Technical specifications
1
105