Download  Print this page

Advertisement

SIMATIC IPC547D

SIMATIC
Industrial PC
SIMATIC IPC547D
Operating Instructions
06/2011
A5E03473780-01

___________________
Preface
___________________
Overview
___________________
Safety information
___________________
Installing and connecting the
device
___________________
Commissioning the device
___________________
Extended device functions
___________________
Installing hardware
expansions
___________________
Device maintenance and
repair
___________________
Technical specifications
___________________
Technical support
___________________
List of abbreviations
1
2
3
4
5
6
7
8
A
B

Advertisement

   Summary of Contents for Siemens SIMATIC IPC547D

  • Page 1 ___________________ SIMATIC IPC547D Preface ___________________ Overview ___________________ Safety information SIMATIC ___________________ Installing and connecting the device Industrial PC ___________________ SIMATIC IPC547D Commissioning the device ___________________ Extended device functions Operating Instructions ___________________ Installing hardware expansions ___________________ Device maintenance and repair ___________________...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
  • Page 3: Preface

    Validity of the Operating Instructions These operating instructions are valid for all supplied versions of the SIMATIC IPC547D. Conventions The terms "PC" or "device" are sometimes used in place of the product name SIMATIC IPC547D in these operating instructions.
  • Page 4 Dimension drawings: Dimensions of the device and of modules  Detailed descriptions of boards and system resources  Appendix Service and Support  Troubleshooting: Problems, causes, remedy  BIOS setup  Abbreviations Abbreviations of the technical terms used SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 5: Table Of Contents

    Information on optional features ....................39 4.3.1 DVD burner ..........................39 4.3.2 Removable hard disks .........................40 4.3.3 System with two hard disks......................41 4.3.4 RAID system ..........................42 4.3.4.1 RAID1 system ..........................42 4.3.4.2 RAID5 system ..........................47 Switching off the device .......................52 SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 6 Setting up the language selection by means of the Multilanguage User Interface (MUI)... 85 7.2.5 Installation of drivers and software ..................... 86 7.2.6 Installing the Intel RAID controller software ................87 7.2.7 Installing the burner or DVD software (optional) ................. 87 SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 7 Technical support ..........................111 Service and support ........................111 Problem solving..........................112 A.2.1 General information ........................112 A.2.2 RAID system and device startup....................113 A.2.3 Using modules of third-party manufacturers................115 List of abbreviations..........................117 Glossary ..............................123 Index..............................135 SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 8 Table of contents SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 9: Overview

    Overview Product description The SIMATIC IPC547D is a powerful industrial PC in 19" rack format design (4 HE). It is perfectly suited for high-performance industrial PC applications. ● Maximum performance ● Attractive price Applications areas The SIMATIC IPC offers system integrators, cabinet designers, system engineers and machine designers a 19"...
  • Page 10 ● RAID1 – redundant data storage on two hard drives, also "hot swap" in connection with SATA removable racks. ● RAID5 – striping with parity on three hard disks, "hot swap" in connection with SATA removable racks ● Redundant power supply SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 11 POWER – internal power supply available, PC switched on  HDD – access to hard drive  TEMP – temperature status  FAN – fan status  Status LEDs, on back Redundant power supply  SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 12 You will find the languages that can be installed on the Recovery DVD. Language Windows XP Pr Windows 7 Windows Server Windows Server Ultimate 2008 2008 R2 German English French Italian Spanish Japanese Chinese Hong Kong Chinese (simplified) Chinese Taiwan Korean Russian SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 13: Design Of The Device

    On/off button ⑩ Front cover with lock Drive labeling In a RAID system with a removable rack, one of the following labels is located on the inside of the front panel cover of the device. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 14 Blanking plate, allows installation of external interfaces ⑥ Expansion slots for:  4 × PCI  1 × PCIe x8 (1 Lane)  1 × PCIe x16 (4 lanes)  1 × PCIe x16 SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 15 DVI-I DVI-I connection ⑮ VGA connection, adapter installed To identify them clearly, the LAN interfaces are numbered on the housing. The numbering by the operating system may deviate from this. Using the graphic card SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 16: Operator Controls

    The following figure shows the location of the on/off switch and the location of the alarm reset button for a device with redundant power supply. ① On/off switch ② Alarm reset button can be used to switch off the warning signal SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 17 The device is damaged. Perform a hardware reset only in the case of an emergency. Close all running programs. Make sure that there is no more read or write access to drives and I/O. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 18: Status Displays

    It may be possible to determine the defective hard disk with the RAID software, see chapter "RAID system (Page 42)" in the operating instructions. Only for RAID5/RAID1+SSD SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 19  Lit green: Power supply module is in operation When there is no redundancy, an acoustic signal sounds continuously. Redundancy is in effect when both power supply units are in operation.  Not lit: Power supply module is out of service SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 20 Overview 1.2 Design of the device SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 21: Safety Information

     Only install system expansion devices designed for this device. Contact your technical support team or where you purchased your PC to find out which system expansion devices may safely be installed.  Observe the information on electromagnetic compatibility (Page 90). SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 22 Avoid high-frequency radiation:  Remove radiation sources from the environment of the device.  Switch off radiating devices.  Reduce the radio output of radiating devices.  Observe the information on electromagnetic compatibility (Page 90). SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 23  If the device has a on/off button, assign the parameters of the function of the on/off button to meet your requirements under Windows. You can find the settings in the "Power Options" menu. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 24: Notes On Use

    IEC 60721-3-3 (pollutant class 3C2 for chemical influences, 3S2 for sand and dust). Without additional measures, such as a supply of clean air, the PC cannot be operated in locations with harsh operating conditions caused by acidic vapors or gases. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 25: Installing And Connecting The Device

    6. If the contents of the packaging are incomplete, damaged or do not match your order, inform the responsible delivery service immediately. Fax the enclosed form "SIMATIC IPC/PG Quality Control Report". SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 26: Identification Data Of The Device

    Windows "Product Key" Ethernet address 1 (MAC) Ethernet address 2 (MAC) Take the information from the rating plate, COA label and component label on the inside of the front panel cover of the device. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 27 2. Write down the Windows "Product Key" from the COA label on the inside of the front cover. 3. Write down the Ethernet addresses from the component label. SIMATIC IPC547D Slot 1 The Ethernet addresses can also be found in the BIOS setup (F2) under "Main >...
  • Page 28: Installing The Device

    ● The minimum distance between the device and the housing is 10 cm on the air output end. ● Install the device in such a way that it does not pose a danger, for example, by falling over. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 29: Mounting Location And Position

    The device may fall down, injure people and get damaged. Secure the device using additional measures. The mounting screws of the telescopic rails may not protrude more than 5 mm into the device.. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 30: Connecting The Device

     Pull out the power plug in good time when a thunderstorm is approaching.  Do not touch mains cables and data transmission cables during a thunderstorm.  Keep sufficient distance from electric cables, distributors, systems, etc. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 31: Connection Of Equipotential Bonding

    The equipotential bonding connection on a device has a large surface and makes contact over a large area. The equipotential bonding connection is identified by the following symbol: Requirement ● T20 screwdriver SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 32: Connecting The Power Supply

    IEC 62040-3. Devices with sinusoidal output voltage in the normal and buffered mode are identified with the classification "VFI-SS-.." or "VI-SS-..". Note The power supply of the device contains a PFC (Power Factor Correction) circuit to conform to the EMC directive. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 33 Use a flexible cable with UL approval and CSA marking as well as the following features: ● Type SJT with three conductors ● At least 18 AWG conductor cross-section ● Max. length of 4.5 m ● Tandem safety plug 15 A, min. 250 V. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 34 Secure the power plug To prevent unintentional removal of the power cable, you can secure the plug as follows: ① 1. Remove the retaining screw ② 2. Screw on the latch for the power plug SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 35 Securing the power plug of the redundant power supply To prevent unintentional removal of the power cable, you can secure the power plug as follows: ① 1. Remove the retaining screws ② 2. Screw on the latch for the power plug SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 36: Connect Device To Networks

    (http://www.siemens.de/automation/csi_en_WW) 3.3.5 Multi-monitoring You can operate up to four monitors in combination with the integrated graphics controller or with the optional NVS300 graphics card. Parameter assignment is performed via the Control Panel in Windows. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 37: Commissioning The Device

    The green POWER LED lights up. The module carries out a self-test. During the self-test, the following message appears: Press <F2> to go to Setup Utility Press <F12> to go to Boot Manager 2. Wait for the message to disappear. 3. Follow the instructions on the screen. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 38 ● Real-time protection (Windows 7 only): Windows Defender displays warnings if spyware or possibly unwanted software is installed or executed on the computer. You will also receive a warning if programs attempt to modify important Windows settings. Configure the Security Center according to your requirements. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 39: Information On Optional Features

    Data comparison is the only guarantee that data has been written correctly. Perform data comparison each time you burn a disc. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 40: Removable Hard Disks

    RAID1 system with two hard disks in removable racks and SSD. An HDD alarm LED is located left of each hard disk in the removable rack. ① Removable rack 0 ② Removable rack 1 ③ Removable rack 2 ④ Power LED; power supply applied ⑤ HDD status display SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 41: System With Two Hard Disks

    Booting from the slave hard disk In order to allow booting from the second hard disk, you need to configure it as the primary boot device. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 42: Raid System

    Note You will find information about the Intel RAID controller in the RAID documentation in the "Drivers\RAID\Intel" directory on the "Documentation and Drivers" DVD that ships with the product. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 43 (hours or even days in the case of a high hard disk load) to synchronize a new hard disk in the background, depending on its size and on the system load. The redundant system state RAID 1 is reached again only after synchronization is completed. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 44 The RAID software indicates the following: ● A defective drive ● Details of the functioning hard disk. The functioning hard disk is indicated by BIOS with its port number or by the RAID software with its device port number. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 45 Device port 1 SATA1 Removable rack ③ HDD2 alarm Port 2 Device port 2 SATA2 Removable rack ④ Port 0 Device port 0 SATA0 Side wall ⑤ Port 1 Device port 1 SATA1 Side wall SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 46 "Run Hardware Scan now " to search for and display the new hard disk. You can also choose to reboot the device. In this case, the RAID software automatically integrates the new HDD. The "Rebuild to another Disk" link synchronizes the RAID system. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 47: Raid5 System

    Note You will find information about the Intel RAID controller in the RAID documentation in the "Drivers\RAID\Intel" directory on the "Documentation and Drivers" DVD that ships with the product. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 48 The redundant system state RAID Level 5 is only recovered if synchronization has been successfully completed. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 49 The RAID software indicates the following: ● A defective drive ● Details of the functioning hard disk The functioning hard disk is indicated by BIOS with its port number or by the RAID software with its device port number. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 50 To be able to boot from the RAID system, you must place this first in the list of bootable sources in the BIOS "Boot" setup menu. Otherwise, the system will boot from the hard disk you have just installed and the message "Operating system not found" will be displayed. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 51 SATA port and can be included in the RAID system. The "Rebuild to another Disk" link initiates synchronization of the RAID1 system. A defective drive is still displayed during the rebuilding process. This drive disappears from the display when the rebuild process is complete. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 52: Switching Off The Device

    The green POWER LED goes out. If the device will not be used for a long period time, turn the on/off switch on the power supply unit to "0". Disconnect the mains connector to isolate the device from mains. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 53: Extended Device Functions

    The SIMATIC IPC DiagMonitor software is available on CD (not included in the product package). This monitoring software includes: ● The software for the stations to be monitored. ● A library for creating user-specific applications. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 54: Temperature Monitoring And Temperature Display

    The operation of the front, CPU and power supply fans is monitored. If a fan fails, the following reactions are triggered: Reaction The "FAN" LED lights up red The SIMATIC monitoring software is activated, if installed. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 55: Watchdog (wd)

    PC. ● SOL (Serial over LAN): Redirection of the data of a serial interface to the network. The main use of the function is text-based remote control of an AMT PC using a console. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 56 SIMATIC IPC Remote Manager The "SIMATIC IPC Remote Manager" software is available for utilization of the AMT functions with SIMATIC IPCs. The software can be ordered from the Siemens online ordering system. For detailed information about "SIMATIC IPC Remote Manager", refer to the corresponding product documentation.
  • Page 57: Installing Hardware Expansions

    Limitation of Liability All technical specifications and approvals apply only to expansions which are approved by the Siemens AG. We are not liable for functional limitations caused by the use of third-party devices or components. Observe the installation instructions for the components. UL approval of the device only applies when UL-approved components are used according to their "Conditions of...
  • Page 58: Opening The

    Requirement ● The front panel cover is open. Procedure 1. Press the marked hooks at the same time to release the front cover. 2. Move the front cover in the direction of the arrow. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 59: Memory Expansion

    25W in total. ● Long PCI, PCIe modules To insert long modules into the guide rails, they must be equipped with an extender. The extender should be included in the product package for long modules. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 60: Installing Expansion Modules

    8. Close the device. Note The device comes with three long brackets for modules with low mounting height. Use the long brackets instead of the ones installed. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 61: Disk Drives

    ● The device is opened. ● T10 screwdriver Procedure 1. Open the hinged front panel. 2. Open the front cover. 3. Remove the highlighted screws. 4. Remove the power supply and data cables from the drives. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 62: Installing Drives Or Removable Racks

    The only way to get at the mounting screws on the right side of the drive is through the openings of the vertical slot. 3. Push the drive or the removable rack into the slot from the front. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 63: Removing And Installing The Drive From The Removable Rack

    6. Connect the power and data cables to the drive. 6.5.4 Removing and installing the drive from the removable rack Requirement ● T10 screwdriver Procedure - Removing drive from the removable rack ① 1. Turn the locking switch to the "OPEN" position. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 64 3. Pull the lever out until you feel the hard disk cartridge release and then pull it out completely. 4. Loosen the four screws on the base of the hard disk cartridge. 5. Pull the drive out of the hard disk cartridge. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 65 Always slide the hard disk cartridge completely into the removable rack before you close the lever. 3. Close the lever of the hard disk cartridge again. 4. Return the locking switch to the "LOCK" position. An audible tone signals that the removable rack is locked into position. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 66: Removing And Installing Internal Hard Disks

    Procedure for installing the hard disk drive ① ② 1. Place the drive onto the drive bay plate and secure the drive with four screws 2. Connect the power and data cables to the drive. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 67: Device Maintenance And Repair

    CE approval (CE mark). The installation instructions for expansion components in the associated documentation must be observed. UL approval of the device only applies when the UL-approved components are used according to their "Conditions of Acceptability". SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 68: Maintenance

    7.1.3 Replacing filters Requirement ● The device is disconnected from the power network ● The front panel cover is open ● A filter mat The order number is A5E02399219. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 69: Removing The Device Fan

    1. Press the marked hooks at the same time to release the front cover. 2. Move the front cover in the direction of the arrow. 3. Remove the front panel. 4. Open the housing cover. 5. Pull the fan plug from the motherboard. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 70: Replacing The Backup Battery

    Information on original spare parts for SIMATIC IPCs is available at After sales information system from SIMATIC IPC (http://www.siemens.com/asis) Disposal CAUTION Depleted batteries must be disposed of in accordance with local regulations. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 71: Removing The Power Supply

    2. Remove the cable ties securing the power cables in the housing. ① 3. Remove the retaining screws 4. Pull out the power supply of the housing from the back. ② 5. Remove the screws SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 72: Removing Module Of The Redundant Power Supply

    7.1.8 Completely removing the redundant power supply Requirement ● The device is disconnected from the power network. ● All cables on the device are pulled out. ● The device is opened. ● T10 screwdriver SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 73: Removing The Motherboard

    ● The device is opened. ● A motherboard The motherboard as spare part is supplied without processor and memory modules. Procedure 1. Remove the modules from the slots. 2. Note the assignment of all cables to the motherboard. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 74: Replacing The Processor

    If the processor type is changed, the BIOS must be updated so that the suitable microcode is loaded. Information about original spare parts for SIMATIC IPCs is available on the Internet at: – After sales information system from SIMATIC IPC (http://www.siemens.com/asis). – Contacts (http://www.siemens.com/automation/partner) SIMATIC IPC547D...
  • Page 75 2. Remove the highlighted fan connector. 3. Remove the highlighted screws. The fourth screw is hidden by the heat sink in the figure. 4. Remove the heat sink. 5. Unlock the socket and lift the socket cover. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 76 If the installed processor is operated with a higher clock frequency than permitted, it can be destroyed or cause loss of data. Operate the processor only at a clock frequency that is equal to or less than the permitted clock frequency. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 77: Installing The Software

    Restoration of the entire hard disk with drive C: (system) and drive D: or only drive C: is possible. This allows you to retain any user data on drive D:. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 78 SATA port number. Example: P3 - OPTIARC DVD-ROM DDU1681S 5. Follow the on-screen instructions. CAUTION All existing data, programs, user settings, authorizations and license keys on the drives will be deleted and are thereby lost. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 79: Installing Windows

    The Windows XP installation program (blue screen) appears after a few seconds. 7. Follow the instructions of the Windows XP installation program. You can find additional information on this in the section: Windows XP installation program SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 80 Note Select the following drivers for the onboard RAID or AHCI controller:  For AHCI controller: "Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller"  For RAID controller: "Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller" SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 81: Installation Of Windows 7, Windows Server 2008 Or Windows Server 2008 R2

    After a few seconds, you will see the "Install Windows" installation program. 7. Now follow the instructions in the installation program. You can find additional information on this in the section: "Install Windows" installation program. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 82 Please read the information in the section "Information for systems with RAID or AHCI controller". Drive options For display of additional functions that you can use to set up the data medium, (advanced) see figure "Windows installation window "Drive options (advanced)"". SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 83 Integrate this driver before you partition the data medium and before you install the operating system. For more information on integrating the storage controller, refer to the section "Information for systems with RAID or AHCI controller (optional)". SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 84 1. Connect the USB stick with the controller driver to the device. 2. Start the "Install Windows" installation program as described above. 3. Select "Load Drivers" in the Windows installation window. 4. Select the respective driver on the USB stick. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 85: Setting Up The Language Selection By Means Of The Multilanguage User Interface (mui)

    Changing the settings for language, region and formats of a registered user account 1. Choose: "Start > Control Panel > Clock, Language, and Region > Regional and Language Options" 2. You can make the desired changes in the "Formats" and "Location und Keyboards and Languages" tabs. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 86: Installation Of Drivers And Software

    4. Select the operating system in "Drivers & Updates". 5. Install the required driver. NOTICE The driver for the chipset has to be installed before all other drivers with a new installation of Windows XP, Windows Server 2008 or Windows 7. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 87: Installing The Intel Raid Controller Software

    Before you install new drivers or operating system updates for Windows MUI versions, set the default language to US English in the regional settings for menus and dialogs. Other operating systems Contact the corresponding manufacturer. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 88: Installing Or Updating User Programs And Drivers

    SIMATIC IPC. Support is only available as of version 3.x. You can order this software from Industry Mall, the ordering system for automation and drive technology (http://mall.automation.siemens.com). For detailed information on the SIMATIC IPC Image&Partition Creator, refer to the corresponding product documentation.
  • Page 89: Technical Specifications

    P.O. Box 1963 D-92209 Amberg, Germany DIN ISO 9001 certificate The Siemens quality management system for all production processes (development, production and sales) meets DIN ISO 9001:2000 requirements. This has been certified by DQS (the German society for the certification of quality management systems).
  • Page 90: Guidelines And Declarations

    Residential and commercial areas and EN 61000-6-3 : 2007 EN 61000-6-1 : 2007 small businesses The devices comply with the standards EN 61000-3-2:2006 +A1:2009 +A2:2009 (harmonic currents) and EN 61000-3-3:2008 (voltage fluctuations and flicker). SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 91: Low-voltage Guideline

    The material with which this person comes into contact is of particular significance. The figure shows the maximum electrostatic voltages with which a person is charged, depending on humidity and material. These values conform to the specifications of IEC 61000-4-2. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 92 In this way, the discharge energy does not reach and damage the sensitive components. – Discharge your body electrostatically before you take a measurement at a module. Do so by touching grounded metallic parts. Always use grounded measuring instruments. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 93: Dimension Drawings

    Technical specifications 8.3 Dimension drawings Dimension drawings 8.3.1 Dimension drawing of the device Front view and plan view SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 94: Dimensional Drawings For The Installation Of Expansion Modules

    Technical specifications 8.3 Dimension drawings 8.3.2 Dimensional drawings for the installation of expansion modules Long PCI module, PCIe module 8.3.3 Dimension drawing for the use of telescopic rails SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 95: Technical Specifications

    IP 20 on the rear according to EN 60529  Dust protection With the front panel closed in accordance with IEC 60529 Filter class G2 EN 779, 99 % of particles > 0.5 mm are filtered SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 96  Atmospheric pressure 1080 to 795 hPa, During operation  corresponds to an elevation of -1000 to 2000 m 1080 to 660 hPa, Storage/transportation  corresponds to an elevation of -1000 to 3500 m SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 97 4 × PCI  1 × PCIe x8 (1 lane)  1 × PCIe x16 (4 lanes)  1 × PCIe x16  You can use modules with a length of up to 312 mm. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 98 RAID1 1 TB (2x 1 TB) + solid state drive SATA 50 GB (SLC)  in removable rack, at the front DVD-ROM 5.25" SATA Read: DVD ROM: Single layer 16x, dual layer 12x  DVD+R/RW, DVD-R/RW 8x, DVD-RAM 2x  CD-ROM, CD-R 32x, CD-RW 20x  SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 99  Maximum resolution:  – DP 2560x1600 at 60 Hz/32 bit colors – DVI 1920x1200 at 60 Hz/32 bit colors – VGA 2048x1536 at 60 Hz/32 bit colors Adapter for VGA and DVI-D supplied SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 100 Line In  2 X 0.5 W/8 Ω Line Out  AMT and teaming cannot be used simultaneously on the Ethernet interface. Approvals CE residential area (emission) EN61000-6-3:2007 CE industrial area (immunity) EN61000-6-2:2005 cUlus 60950-1 SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 101: Power Requirements Of The Components (maximum Values)

    The total output of the +5 V and +3.3 V voltage must not exceed 190 W. The inrush current is: ● For 110 V AC: Maximum 25 A, 5 ms ● For 240 V AC: Maximum 30 A, 5 ms SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 102: Redundant Power Supply

    A removable cartridge with hard disk can be installed instead of DVD drive(s). Devices equipped with removable HDD frames must not to be exposed to mechanical loads during operation, in accordance with DIN IEC 60068-2. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 103: Hardware Description

    ● Backup battery You will find a detailed description of the motherboard as well as the interfaces in the technical manual of the D3076-S11 motherboard on the "Documentation and Drivers" DVD that ships with the product. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 104: System Resources

    Host PCI-IRQ A to H is assigned to IRQ 16 to 23 permanently in APIC mode. Host PCI-IRQ A to H is automatically assigned to IRQ 0 to 15 in PIC mode by the BIOS. A specific assignment cannot be forced. Interrupt PIC and APIC mode Interrupt APIC mode BIOS Default Interrupt PIC mode, e.g. DOS SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 105 The interrupts are automatically assigned to the slots at system startup due to the default settings in system BIOS. Several slots may share the same interrupt, depending on the system configuration. This functionality is known as interrupt sharing. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 106: Bios Description

    The processors Intel Core i5 and Core i7 support Intel® vPro and Intel Active Management Technology at the hardware end. An administrator at the Help Desk PC accesses the AMT PCs. Only the AMT PCs must have an integrated Intel AMT. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 107: Overview Of Amt

    This section describes the required measures and settings on the local IPC so that the IPC can be controlled and maintained remotely from a management station known below as the help desk PC. The local IPC is known below as the "AMT PC". SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 108: Enabling Amt, Basic Configuration

    The underscore _ and the space characters are valid password characters, however they do not increase password complexity. 9. Enable "Intel (R) AMT Configuration > Manageability Feature Selection". 10. Enable "Intel (R) ME General Settings > Activate Network Access". SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 109: Advanced Settings

    3. After the restart, a user prompt appears asking whether you really want to discard all the settings in the management engine: 4. Confirm with "Y". On a German keyboard, this means pressing the <Z> key. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 110: Determining The Network Address

    2. Select the value "KVM" for "User Consent". To allow a user with administrator privileges to avoid this code query, follow these steps: 1. Select "Intel(R) AMT Configuration > User Consent" in the MEBx. 2. Enable "Opt-in configurable from remote IT". SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 111: Technical Support

    ● Installed additional software Tools & downloads Please check regularly if updates and hotfixes are available for download to your device. The downloads are available on the Internet under "After Sales Information System SIMATIC PC/PG" (see above). SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 112: Problem Solving

    Wrong time and/or date on the 1. Press <F2> during the booting process to open the BIOS Setup. 2. Set the time and date in the setup menu. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 113: Raid System And Device Startup

    The Intel® Matrix  Storage Console was unable to load a page for the following reason: – A plug-in did not provide a page for the selected device – A plug-in failed to load SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 114 5. In the following "Install Windows" dialog, click on "Repair your computer" or press the <R> key. The "System Recovery Options" dialog appears. The system is checked for errors. 6. Next, click "Repair and restart" SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 115: Using Modules Of Third-party Manufacturers

    Different pin assignment  third-party module being used was the cause of the fault. Replace the thrid-party module with a Siemens module or contact the module supplier. If the device still crashes, contact your technical support team. Insufficient output of an external Use a higher capacity power supply ...
  • Page 116 Technical support A.2 Problem solving SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 117: List Of Abbreviations

    Complementary metal oxide Semiconductors semiconductors Certificate of authentication Microsoft Windows Product Key Certificate of License License authorization Communications Port Term for the serial interface Communication Processor Communication computer Central Processing Unit Cathode Ray Tube SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 118 Control character Enhanced Write Filter Frequently Asked Questions FAQs FAT 32 File Allocation Table 32-bit 32-bit file allocation table FBWF File-Based Write Filter Floppy disk Disk drive, 3.5" Front Side Bus Ground Chassis ground SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 119 Micro Memory Card Memory card of the format 32 mm x 24.5 Multipoint-capable interface for programming devices MS-DOS Microsoft Disc Operating System MTBF Mean Time Between Failures Multilanguage User Interface Language localization in Windows SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 120 Incoming call Read-Only Memory RS 485 Reconciliation Sublayer 485 Bi-directional bus system designed for up to 32 nodes Real Time Clock Real-time clock Reliable Transfer Service Request to send Receive Data Data transfer signal SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 121 Ultra Extended Graphics Array Graphic standard, maximum resolution 1600x1200 pixels. V.24 ITU-T standardized recommendation for data transfer via serial ports Positive supply voltage of integrated circuits Verein deutscher Elektrotechniker (Union of German Electrical Engineers) SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 122 Program monitoring with error detection and alarming. WLAN Wireless LAN LWireless local area network Wake on Local Area Network World Wide Web Execute Disable Capability Hardware implementation Extended Graphics Array Graphic standard, maximum resolution 1024x768 pixels. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 123: Glossary

    2 x 2 sequences. Boot disk A boot disk is a disk with a "Boot" sector. This can be used to load the operating system from the disk. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 124 . This is done either by copying the configuration files supplied with the module or by manual configuration using the configuration utility. Controller Integrated hardware and software controllers that control the functions of certain internal or peripheral devices (for example, the keyboard controller). SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 125 RW "Rewritable" means you can rewrite the DVD up to approximately 1000 times. Error checking and correction is a method for detecting and correcting errors when saving and transferring data, frequently used in conjunction with RAM modules with and without ECC. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 126 EFI is located logically beneath the operating system and represents the successor to PC BIOS, focusing on 64-bit systems. File Based Write Filter (FBWF) Configurable write filter to protect individual files from write access. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 127 Integrated Graphics Device. Graphics interface integrated in the chipset. Image This refers to the image, for example, of hard disk partitions saved to a file in order to restore them when necessary. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 128 Legacy USB support Support of USB devices (e.g. mouse, keyboard) on the USB ports without driver. License key The license key represents the electronic license stamp of a license. Siemens provides the license keys for protected software. License key disk The license key disk contains the authorizations or license keys required to enable protected SIMATIC software.
  • Page 129 ISO9660 shell. You can still write to the CD-RW several times in spite of finalization. Not all CD drives can read packet-written CDs . There are restrictions to using this method in general data transfer. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 130 PEG interface PCI Express for Graphics. Graphics interface with 16 PCIe lanes for expansions with graphics modules. PIC mode Peripheral interrupt controller. 15 interrupt lines are available. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 131 The hard disk array is controlled by management programs and a hard disk controller for error correction. The RAID system is usually implemented in network servers. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 132 Serial ATA Interface for hard disk drives and optical drives with serial data transmission rates of up to 300 Mbps. SCSI interface Small Computer System Interface Interface for connecting SCSI devices such as hard disk drives or optical drives. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 133 It is only supported by Core i5 and Core i7 processors. V.24 interface V.24 is a standardized interface for data transfer. Printers, modems, and other hardware modules can be connected to a V.24 interface. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 134 The CTRL+ ALT+ DEL hotkey can be used to initiate a warm restart. WLAN Wireless LAN is a local network that transmits data via radio waves, infrared light or another wireless technology. Wireless LAN is mainly used for mobile computer applications in office or factory environments. SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 135: Index

    Fan, 69 Equipotential bonding, 32 FCC, 90 Peripherals, 31 Features, 11 Connection of equipotential bonding, 32 Fire protection, 28 Country-specific information, 33 Fire protection housing, 28 Firewall, 38 Front cover, 69 Front view, 13, 93 SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 136 Can be installed, 12 Operator control element Latch for power plug, 34, 35 On/off button, 17 LEDs, 18 On/off switch, 16 License key, 78 Output voltage, 101, 102 Limitation of Liability, 67 Lithium battery, 70 LPT1, 100 SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 137 RAID Level 1, 43 Temperature monitoring, 54 RAID system, 43 Temperature ranges Management functions, 43 Approved configuration versions, 102 Management functions, 43 Terminal element, 15 Rating plate, 27 Tools, 68 Real-time protection, 38 Troubleshooting, 114 SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...
  • Page 138 User programs and drives, 88 Vent slots, 28 Warranty, 21 Watchdog, 11 Monitoring function, 55 Windows 7 Installation, 81 Windows Security Center, 38 Windows Server 2008 Installation, 81 Windows Server2008 R2 Installation, 81 Windows XP Installation, 79 SIMATIC IPC547D Operating Instructions, 06/2011, A5E03473780-01...

Comments to this Manuals

Symbols: 0
Latest comments: