Automatic Startup Of The Device Depending On The Bios Entry - Siemens SIMATIC IPC547E Operating Instructions Manual

Commissioning the device
4.2 Switching on the device
4. Make the required region and language settings.
If you want your system language to be international, select English. You can find
information about changing the regional and language settings at a later point in time in
the section "Setting up the language selection using the Multilanguage User Interface
(MUI) (Page 89)".
Note
Once the operating system has been set up, the device may restart.
5. Type in the product key as required.
The product key is located on the "Certificate of Authentication" in the "Product Key" line,
see section "Device identification data (Page 29)".
Result
The interface of the operating system is displayed every time you turn on the device and
after the startup routine.
4.2.1

Automatic startup of the device depending on the BIOS entry

You can specify "Power Failure Recovery" in the BIOS Setup entry so that the device
automatically starts up again after a separation from the mains voltage for more than 20
seconds.
Automatic startup may endanger the operation of the machine or plant, for example, after a
power failure.
Take the BIOS Setup entry "Power Failure Recovery" into consideration in the plant
planning.
42
Operating Instructions, 09/2013, A5E32317120-AA
SIMATIC IPC547E