Smart Zoning Member Configuration; Enabling Smart Zoning On A Vsan; Setting Default Value For Smart Zoning - Cisco Nexus 5000 Series Configuration Manual

Smart Zoning Member Configuration

Smart Zoning Member Configuration
The following table displays the supported smart zoning member configurations.
Feature
PWWN
FCID
FC Alias
Device-alias
Interface
IP Address
Symbolic nodename
FWNN
Domain ID

Enabling Smart Zoning on a VSAN

To enable smart zoning for a VSAN, perform these tasks:
SUMMARY STEPS
1. switch# configure terminal
2. switch(config)# system default zone smart-zone enable
DETAILED STEPS
Command or Action
Step 1 switch# configure terminal
Step 2 switch(config)# system default zone smart-zone
enable

Setting Default Value for Smart Zoning

To set the default value, perform these tasks:
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
152
Supported
Yes
Yes
Yes
Yes
No
No
No
No
No
Purpose
Enters global configuration mode.
Enables smart zoning on a VSAN that are created based on
the specified default value.
Configuring and Managing Zones
OL-27583-01