Default Zone Policies; Configuring System Default Zoning Settings - Cisco Nexus 5000 Series Configuration Manual

Enhanced Zoning

Default Zone Policies

You can permit or deny traffic in the default zone.
SUMMARY STEPS
1. configure terminal
2. zone default-zone permit vsan vsan-id
3. no zone default-zone permit vsan vsan-id
4. zone commit vsan vsan-id
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 zone default-zone permit vsan vsan-id
Example:
switch(config)# zone default-zone permit vsan 12
Step 3
no zone default-zone permit vsan vsan-id
Example:
switch(config)# no zone default-zone permit vsan 12
Step 4 zone commit vsan vsan-id
Example:
switch(config)# zone commit vsan 340

Configuring System Default Zoning Settings

You can configure default settings for default zone policies and full zone distribution for new VSANs on the
switch.
SUMMARY STEPS
1. configure terminal
2. system default zone default-zone permit
3. no system default zone default-zone permit
4. system default zone distribute full
5. no system default zone distribute full
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
162
Configuring and Managing Zones
Purpose
Enters global configuration mode.
Permits traffic flow to default zone members.
Denies traffic flow to default zone members and
reverts to factory default.
Commits the changes made to the specified VSAN.
OL-27583-01