Database Reactivation - Cisco Nexus 5000 Series Configuration Manual

Configuring Port Security
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 port-security activate vsan vsan-id force
Example:
switch(config)# port-security activate vsan 210
force

Database Reactivation

You can reactivate the port security database.
SUMMARY STEPS
1. configure terminal
2. no no port-security auto-learn vsan vsan-id
3. exit
4. port-security database copy vsan vsan-id
5. configure terminal
6. port-security activate vsan vsan-id
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 no no port-security auto-learn vsan vsan-id
Example:
switch(config)# no no port-security auto-learn
vsan 35
Step 3
exit
Example:
switch(config)# exit
OL-27583-01
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
Purpose
Enters global configuration mode.
Forces the port security database to activate for the
specified VSAN even if conflicts occur.
Purpose
Enters global configuration mode.
Disables auto-learning and stops the switch from learning
about new devices that access the switch. This command
also enforces the database contents based on the devices
learned up to this point.
Exits the configuration mode.
Port Security Activation
259