Clearing Fspf Counters For An Interface - Cisco Nexus 5000 Series Configuration Manual

Configuring Fibre Channel Routing Services and Protocols
FSPF must be enabled at both ends of the interface for the protocol to work.
Note
SUMMARY STEPS
1. configure terminal
2. switch(config)# interface fc slot/port
3. fspf passive vsan vsan-id
4. no fspf passive vsan vsan-id
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 switch(config)# interface fc slot/port
Step 3
fspf passive vsan vsan-id
Example:
switch(config-if)# fspf passive vsan 24
Step 4 no fspf passive vsan vsan-id
Example:
switch(config-if)# no fspf passive vsan 23

Clearing FSPF Counters for an Interface

You can clear the FSPF statistics counters for an interface.
SUMMARY STEPS
1. switch# clear fspf counters vsan vsan-id interface fc slot/port
OL-27583-01
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
FSPF Interface Configuration
Purpose
Enters global configuration mode.
Configures a specified interface, or if already configured,
enters configuration mode for the specified interface.
Disables FSPF for the specified interface in the specified
VSAN.
Reenables FSPF for the specified interface in the specified
VSAN.
189