Verifying Npv Examples - Cisco Nexus 5000 Series Configuration Manual

Verifying NPV
SUMMARY STEPS
1. switch# show npv flogi-table [all]
DETAILED STEPS
Command or Action
Step 1 switch# show npv flogi-table [all]

Verifying NPV Examples

To display a list of devices on a server interface and their assigned NP uplinks, enter the show npv flogi-table
command on the Cisco Nexus device:
switch# show npv flogi-table
--------------------------------------------------------------------------------
SERVER
INTERFACE VSAN FCID
---------------------------------------------------------------------------------
vfc3/1
vfc3/1
vfc3/1
vfc3/1
Total number of flogi = 4
For each server interface, the External Interface value displays the assigned NP uplink.
Note
To display the status of the server interfaces and the NP uplink interfaces, enter the show npv status command:
switch# show npv status
npiv is enabled
External Interfaces:
====================
Interface: fc2/1, VSAN: 1, FCID: 0x1c0000, State: Up
Interface: fc2/2, VSAN: 1, FCID: 0x040000, State: Up
Interface: fc2/3, VSAN: 1, FCID: 0x260000, State: Up
Interface: fc2/4, VSAN: 1, FCID: 0x1a0000, State: Up
Number of External Interfaces: 4
Server Interfaces:
==================
Interface: vfc3/1, VSAN: 1, NPIV: No, State: Up
Number of Server Interfaces: 1
Note To view fcns database entries for NPV edge switches, you must enter the show fcns database command
on the core switch.
To view all the NPV edge switches, enter the show fcns database command on the core switch:
core-switch# show fcns database
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
64
PORT NAME
1 0xee0008 10:00:00:00:c9:60:e4:9a 20:00:00:00:c9:60:e4:9a
1 0xee0009 20:00:00:00:0a:00:00:01 20:00:00:00:c9:60:e4:9a
1 0xee000a 20:00:00:00:0a:00:00:02 20:00:00:00:c9:60:e4:9a
1 0xee000b 33:33:33:33:33:33:33:33 20:00:00:00:c9:60:e4:9a
Configuring N Port Virtualization
Purpose
Displays the NPV configuration.
NODE NAME
EXTERNAL
INTERFACE
fc2/1
fc2/2
fc2/3
fc2/4
OL-27583-01