Cisco Nexus 5000 Series Nx-Os San Switching Configuration Guide, Release 5.2(1)N1(1 - Cisco Nexus 5000 Series Configuration Manual

Configuring Fibre Channel Interfaces
Parameters
Beacon mode
EISL encapsulation
Data field size
The following table lists the default settings for virtual Fibre Channel interface parameters.
Table 6: Default Virtual Fibre Channel Interface Parameters
Parameters
Interface mode
Interface speed
Administrative state
Trunk mode
Trunk-allowed VSANs
Interface VSAN
EISL encapsulation
Data field size
OL-27583-01

Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)

Default Fibre Channel Interface Settings
Default
Off (disabled)
Disabled
2112 bytes
Default
F mode
n/a
Shutdown (unless changed during initial setup)
On
All VSANs
Default VSAN (1)
n/a
n/a
29