Resetting Fspf To The Default Configuration - Cisco Nexus 5000 Series Configuration Manual

Configuring Fibre Channel Routing Services and Protocols
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 fspf config vsan vsan-id
Example:
switch(config)# fspf config vsan 14
Step 3 spf static
Example:
switch-config-(fspf-config)# spf static
Step 4
spf hold-time value
Example:
switch-config-(fspf-config)# spf hold-time
10
Step 5 region region-id
Example:
switch-config-(fspf-config)# region 1

Resetting FSPF to the Default Configuration

You can return the FSPF VSAN global configuration to its factory default.
SUMMARY STEPS
1. configure terminal
2. no fspf config vsan vsan-id
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
switch# configure terminal
switch(config)#
OL-27583-01
Purpose
Enters global configuration mode.
Enters FSPF global configuration mode for the specified VSAN.
Note
Forces static SPF computation for the dynamic (default)
incremental VSAN.
Configures the hold time between two route computations in
milliseconds (msec) for the entire VSAN. The default value is 0.
Note
Configures the autonomous region for this VSAN and specifies
the region ID.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
User needs to configure the VSAN on which FSPF is
being configured.
If the specified time is shorter, the routing is faster.
However, the processor consumption increases
accordingly.
Purpose
Enters global configuration mode.
FSPF Global Configuration
183