Cisco Nexus 5000 Series Configuration Manual page 285

Configuring Port Security
• A nWWN (N3) is allowed access through any interface.
• A pWWN (P3) is allowed access through interface fc2/4 (F4).
• A sWWN (S1) is allowed access through interface fc3/1-3 (F10 to F13).
• A pWWN (P10) is allowed access through interface vfc4/1 (F11).
The following table summarizes the port security authorization results for this active database.
Table 34: Authorization Results for Scenario
Device Connection
Request
P1, N2, F1
P2, N2, F1
P3, N2, F1
P1, N3, F1
P1, N1, F3
P1, N4, F5
P5, N1, F5
P3, N3, F4
S1, F10
S2, F11
P4, N4, F5 (auto-learning
on)
P4, N4, F5 (auto-learning
off)
S3, F5 (auto-learning on)
S3, F5 (auto-learning off)
P1, N1, F6 (auto-learning
on)
P5, N5, F1 (auto-learning
on)
S3, F4 (auto-learning on)
OL-27583-01
Authorization
Permitted
Permitted
Denied
Permitted
Permitted
Denied
Denied
Permitted
Permitted
Denied
Permitted
Denied
Permitted
Denied
Denied
Denied
Denied
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
Condition Reason
1 No conflict.
1 No conflict.
2 F1 is bound to P1/P2.
6 Wildcard match for N3.
5 Wildcard match for F3.
2 P1 is bound to F1.
2 N1 is only allowed on F2.
1 No conflict.
1 No conflict.
7 P10 is bound to F11.
3 No conflict.
4 No match.
3 No conflict.
4 No match.
2 P1 is bound to F1.
7 Only P1 and P2 bound to
F1.
7 P3 paired with F4.
Auto-Learning
263