Interop Mode; Displaying The Static Vsan Configuration; Default Settings For Vsans - Cisco Nexus 5000 Series Configuration Manual

Displaying the Static VSAN Configuration

Command or Action
Step 7
vsan vsan-id suspend
Example:
switch(config-vsan-db)# vsan 23 suspend
Step 8 no vsan vsan-id suspend
Example:
switch(config-vsan-db)# no vsan 23 suspend
Step 9 end
Example:
switch(config-vsan-db)# end

Interop Mode

Interoperability enables the products of multiple vendors to connect with each other. Fibre Channel standards
guide vendors to create common external Fibre Channel interfaces.
Related Topics
Switch Interoperability, on page 228
Displaying the Static VSAN Configuration
The following example shows how to display information about a specific VSAN:
switch# show vsan 100
The following example shows how to display VSAN usage:
switch# show vsan usage
4 vsan configured
configured vsans:1-4
vsans available for configuration:5-4093
The following example shows how to display all VSANs:
switch# show vsan

Default Settings for VSANs

The following table lists the default settings for all configured VSANs.
Table 17: Default VSAN Parameters
Parameters
Default VSAN
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
128
Configuring and Managing VSANs
Purpose
Suspends the selected VSAN.
Negates the suspend command entered in the previous
step.
Returns you to EXEC mode.
Default
VSAN 1.
OL-27583-01