Configuring Fabric Names - Cisco Nexus 5000 Series Configuration Manual

Fibre Channel Domains
DETAILED STEPS
Command or Action
Step 1
switch# configure terminal
Step 2
switch(config)# no fcdomain vsan vsan-id - vsan-id
Step 3 switch(config)# fcdomain vsan vsan-id

Configuring Fabric Names

You can set the fabric name value for a disabled fcdomain.
SUMMARY STEPS
1. configure terminal
2. fcdomain fabric-name 20:1:ac:16:5e:0:21:01 vsan vsan-id
3. no fcdomain fabric-name 20:1:ac:16:5e:0:21:01 vsan vsan-id
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
fcdomain fabric-name 20:1:ac:16:5e:0:21:01 vsan vsan-id
Example:
switch(config)# fcdomain fabric-name
20:1:ac:16:5e:0:21:01 vsan 1
Step 3 no fcdomain fabric-name 20:1:ac:16:5e:0:21:01 vsan
vsan-id
Example:
switch(config)# no fcdomain fabric-name
20:1:ac:16:5e:0:21:01 vsan 1
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
36
Configuring Fibre Channel Domain Parameters
Purpose
Enters global configuration mode.
Disables the fcdomain configuration in the specified VSAN
range.
Enables the fcdomain configuration in the specified VSAN.
Purpose
Enters global configuration mode.
Assigns the configured fabric name value in the specified
VSAN. The VSAN ID ranges from 1 to 4093.
Changes the fabric name value to the factory default
(20:01:00:05:30:00:28:df) in VSAN 3010. The VSAN
ID ranges from 1 to 4093.
OL-27583-01