Counting Individual Flow Statistics - Cisco Nexus 5000 Series Configuration Manual

Configuring Fibre Channel Routing Services and Protocols
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 fcflow stats aggregated index value vsan vsan-id
Example:
switch(config)# fcflow stats aggregated index 20 vsan 12
Step 3 no fcflow stats aggregated index value vsan vsan-id
Example:
switch(config)# no fcflow stats aggregated index 20 vsan
12

Counting Individual Flow Statistics

You can count the flow statistics for a source and destination FC ID in a VSAN.
SUMMARY STEPS
1. configure terminal
2. fcflow stats index value dest-fcid source-fcid netmask vsan vsan-id
3. no fcflow stats aggregated index value vsan vsan-id
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
fcflow stats index value dest-fcid source-fcid netmask vsan
vsan-id
Example:
switch(config)# fcflow stats index 10 0x123aff
0x070128 0xffffff vsan 15
OL-27583-01
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
Flow Statistics Configuration
Purpose
Enters global configuration mode.
Enables the aggregated flow counter.
Disables the aggregated flow counter.
Purpose
Enters global configuration mode.
Enables the flow counter.
The source ID and the destination ID are
Note
specified in FC ID hex format (for example,
0x123aff). The mask can be one of 0xff0000
or 0xffffff.
197