Displaying Scsi Lun Information - Cisco Nexus 5000 Series Configuration Manual

Discovering SCSI Targets
SUMMARY STEPS
1. switch# discover custom-list add vsan vsan-id domain domain-id
2. switch# discover custom-list delete vsan vsan-id domain domain-id
DETAILED STEPS
Command or Action
Step 1
switch# discover custom-list add vsan vsan-id domain
domain-id
Step 2 switch# discover custom-list delete vsan vsan-id domain
domain-id

Displaying SCSI LUN Information

Use the show scsi-targetand show fcns databasecommands to display the results of the discovery.
The following example displays the discovered targets:
switch# show scsi-target status
discovery completed
This command takes several minutes to complete, especially if the fabric is large or if several devices are
Note
slow to respond.
The following example displays the FCNS database:
switch# show fcns database
The following example displays the SCSI target disks:
switch# show scsi-target disk
The following example displays the discovered LUNs on all operating systems:
switch# show scsi-target lun os all
The following example displays the port WWN that is assigned to each operating system (Windows, AIX,
Solaris, Linux, or HPUX):
switch# show scsi-target pwwn
OL-27583-01
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
Displaying SCSI LUN Information
Purpose
Adds the specified entry to the custom list.
Deletes the specified domain ID from the custom
list.
217