Cisco Nexus 5000 Series Configuration Manual page 49

Configuring Fibre Channel Interfaces
Ethernet1/3 is up
...
mgmt0 is up
...
vethernet1/1 is up
...
vfc 1 is up
The following example shows how to display multiple specified interfaces:
switch# show interface fc3/1 , fc3/3
fc3/1 is up
...
fc3/3 is up
...
The following example shows how to display a specific interface:
switch# show interface vfc 1
vfc 1 is up
...
The following example shows how to display interface descriptions:
switch# show interface description
-------------------------------------------------
Interface
-------------------------------------------------
fc3/1
Ethernet1/1
vfc 1
...
The following example shows how to display all interfaces in brief:
switch# show interface brief
The following example shows how to display interface counters:
switch# show interface counters
The following example shows how to display transceiver information for a specific interface:
switch# show interface fc3/1 transceiver
Note The show interface transceiver command is only valid if the SFP is present.
The show running-configuration command displays the entire running configuration with information for
all interfaces. The interfaces have multiple entries in the configuration files to ensure that the interface
configuration commands execute in the correct order when the switch reloads. If you display the running
configuration for a specific interface, all the configuration commands for that interface are grouped together.
The following example shows the interface display when showing the running configuration for all interfaces:
switch# show running configuration
...
interface fc3/5
switchport speed 2000
...
interface fc3/5
switchport mode E
...
interface fc3/5
channel-group 11 force
no shutdown
The following example shows the interface display when showing the running configuration for a specific
interface:
switch# show running configuration fc3/5
interface fc3/5
OL-27583-01
Description
test intest
--
--
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
Verifying Fibre Channel Interfaces
27