About Load Balancing; Configuring Load Balancing - Cisco Nexus 5000 Series Configuration Manual

Guidelines and Limitations for VSANs
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 vsan database
Example:
switch(config)# vsan database
switch(config-vsan-db)#
Step 3
vsan vsan-id
Example:
switch(config-vsan-db)# vsan 2
Step 4 switch(config-vsan-db)# no vsanvsan-id
Example:
switch(config-vsan-db)# no vsan 5
Step 5 switch(config-vsan-db)# end
Example:
switch(config-vsan-db)# end

About Load Balancing

Load-balancing attributes indicate the use of the source-destination ID (src-dst-id) or the originator exchange
OX ID (src-dst-ox-id, the default) for load-balancing path selection.

Configuring Load Balancing

You can configure load balancing on an existing VSAN.
Load-balancing attributes indicate the use of the source-destination ID (src-dst-id) or the originator exchange
OX ID (src-dst-ox-id, the default) for load-balancing path selection.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
126
Configuring and Managing VSANs
Purpose
Enters global configuration mode.
Configures the VSAN database.
Places you in VSAN configuration mode.
Deletes VSAN 5 from the database and switch.
Places you in EXEC mode.
OL-27583-01