Smart Zoning Member Configuration; Enabling Smart Zoning On A Vsan; Setting Default Value For Smart Zoning - Cisco MDS 9000 Series Configuration Manual

Smart Zoning Member Configuration

Smart Zoning Member Configuration
Table displays the supported smart zoning member configurations.
Table 7: Smart Zoning Configuration
Feature
PWWN
FCID
FCalias
Device-alias
Interface
IP address
Symbolic nodename
FWWN
Domain ID

Enabling Smart Zoning on a VSAN

To configure the smart zoning for a VSAN, follow these steps:
Step 1 switch# configure terminal
Enters configuration mode.
Step 2
switch(config)# zone smart-zoning enable vsan 1
Enables smart zoning on a VSAN.
Step 3
switch(config)# no zone smart-zoning enable vsan 1
Disables smart zoning on a VSAN.

Setting Default Value for Smart Zoning

To set the default value, follow these steps:
Step 1 switch# configure terminal
Enters configuration mode.
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
96
Supported
Yes
Yes
Yes
Yes
No
No
No
No
No
Configuring and Managing Zones