Plc Module - Siemens SINUMERIK 810D Configuration Manual

4 Description of the SINUMERIK 810D

4.6 PLC module

Fig. 4-17
Fig. 4-18
References: /PJ1/ SIMODRIVE Planning Guide
4.6 PLC module
PLC module
The PLC module is a PLC CPU compatible with the S7-300 product line. Three
external lines each with eight S7-300 peripheral modules can be connected via
the X111 PK bus. Up to three single I/O modules can be connected. It is
possible to mix IM361s and EFPs.
References:
4.7 PCMCIA card (memory card)
A slot is available on the CCU for standard PC cards supporting all Type II flash
cards up to 8MB memory capacity.
Recommendation: use Siemens PC cards.
4-80
I
I
max
I
n
I = peak current
max
I = rated current
n
Peak current load cycle with previous load for FDD
I
I
max
I
n
I = peak current
max
I = rated current
n
Peak current load cycle without previous load for FSD
/S7H/, Manual: Assembly, CPU Data
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
0.2secs
10 secs
4secs
10 secs
E Siemens AG, 2002. All rights reserved
11.02
12.95
t
t