12.95
12.95
-
Fig. 3-6
2
axis CCU box: Installing the shield plate
3.2.1
Modification for external cooling, 2-axis CCU box (SW 5 and
higher)
Loosen screws M6
and remove angle
Loosen screws M6
and remove angle
Fig. 3-7
2-axis CCU box: Modification for external cooling
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
Assembly shield plate
Modification for external cooling
Alteration for external use
Put on ground spring
(packed in flat bag)
3 Design and Installation of the 810D
3.2 Installing the SINUMERIK 810D
Put on ground spring
(packed in flat bag)
3-47