Dmp Compact Module 1I Analog (6Fc5 111-0Ca04-0Aa0) - Siemens SINUMERIK 810D Configuration Manual

12.95
8.4

DMP compact module 1I analog (6FC5 111-0CA04-0AA0)

The DMP compact module 1I analog is an encapsulated module. It can be
inserted into an NCU terminal block slot as a plug-on module. (maximum of four
modules per terminal block)
Fig. 8-4
S
Interfaces
S
S
Display elements
One LED as status display for power supply.
LED lights up:
Jumpering
S1:
S2:
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
8.4 DMP compact module 1I analog (6FC5 111-0CA04-0AA0)
Status
POWER
SUPPLY
LED
O.K.
Strip label
ANALOG
IN
Fixing screw
Front and side view of DMP compact module 1I analog
One 30-way plug-in connector X1 for connection to the NCU terminal block.
4-way terminal X3 (Phoenix, type MSTB2,5/4-ST-5,08 GRAY, Order No. for
X3: 18 48 407) for connecting the supply voltage for the analog section and
6-way terminal X2 (Phoenix, type MSTB2,5/6-ST-5,08 GRAY, Order No. for
X2: 17 87 076) for connecting the analog input.
The terminals are of the plug-in type and can be mechanically coded by the
user.
Internal power supply OK.
Setting of measuring range
1--2 closed: + 10V
1--3 closed: + 500mV
Setting of mains frequency
closed: for 50Hz systems
open: for 60Hz systems.
8 DMP Compact Modules
P1 P2 M1 M2
2.5
24VDC
0V
X3
Supply terminals
S1
X1
1 1
3 2 2
6 . . 1
X2
Terminal:
6, 1 Shield
2
2.5
3
4
5
S2
Current source for PT1
Analog input In+
Analog input In--
Ground
8-109