Dmp Compact Module 1I Nc Analog (6Fc5 211-0Aa10-0Aa0) - Siemens SINUMERIK 810D Configuration Manual

8 DMP Compact Modules

8.5 DMP compact module 1I NC analog (6FC5 211-0AA10-0AA0)

8.5 DMP compact module 1I NC analog
(6FC5 211-0AA10-0AA0)
The DMP compact module 1I NC (6FC5 211-0AA10-0AA0) analog is an
encapsulated rapid analog input module with an access time of
75μs. It can be inserted into an NCU terminal block slot as a plug-on module
(maximum of four modules per terminal block).
Fig. 8-6
S
Interfaces
S
S
Display elements
One LED as status display for power supply.
LED lights up:
8-112
Status
POWER
SUPPLY
LED
O.K.
Strip label
ANALOG
IN
Fixing screw
Front and side view of DMP compact module 1 I NC analog
One 30-way plug-in connector X1 for connection to the NCU terminal block.
4-way terminal X3 (Phoenix, type MSTB2,5/4-ST-5,08 GRAY, Order No. for
X3: 18 48 407) for connecting the supply voltage for the analog section and
6-way terminal X2 (Phoenix, type MSTB2,5/6-ST-5,08 GRAY, Order No. for
X2: 17 87 076) for connecting the analog input.
The terminals are of the plug-in type and can be mechanically coded by the
user.
internal power supply OK.
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
M1 M2
P1 P2
2.5
24VDC
0V
X3 Supply terminals
S1
X1
1 1
3 2 2
6 . . 1
X2
Terminal:
6, 1 Shield
2
2.5
3
4
5
E Siemens AG, 2002. All rights reserved
12.95
S2
Ground
Analog input In+
Analog input In--
Ground